Prepare the Base

Measure and Cut: Measure and cut the piece of wood for the base to your desired size.

 Attach the Sides

Measure and Cut Dowels: Cut the wooden dowels or sticks to the desired height of the sides of your bird feeder. A height of around 6 inches is usually good.

 Drill Holes: Drill small holes into the four corners of the base where the dowels will be inserted.

 Prepare the Roof

 Measure and Cut: Measure and cut the piece of wood for the roof. It should be slightly larger than the base to provide some overhang and protect the birdseed from rain.

 Drill Holes: Drill small holes in the roof where it will be attached to the dowels.

 Add the Hanging Mechanism

 Drill Holes: Drill two holes near the top of the roof on opposite sides. Attach String or Wire: Thread a piece of string or wire through the holes and tie it securely

 Finishing Touches

Check Stability: Ensure that all parts are securely attached and the feeder is stable.

 Hang the Bird Feeder

Choose a Location: Find a suitable location to hang your bird feeder. It should be in a place where birds can easily access it but safe from predators.